|
|
|
|
Special offer
for churches.
Highest quality!
|
|
AMWLC-9DSP Type amplifiers
|
|
|
|
|
|
Amplifier with DSP processor equipment:
 |
eight XLR programmable, symmetrical microphone or linear inputs with
sensitivity, gain, soprano, and bass control, as well as overdrive
signalling; |
|
|
adjustable expander and compressor to be turned on,
100 Hz filter to be turned on, microphone/line changeover and Phantom power
supply in each microphone channel; |
|
|
automatic echo elimination; |
|
|
RCA (Cinch) universal input with gain, soprano and bass control; |
|
|
10-point input parametric equalizer:
- frequency control from 20 Hz to 20 kHz,
- bandwidth control from 0,05 to 3 dB.oct.
- band depth control from -12 dB to +12 dB; |
|
|
4 symmetrical 0 dB outputs (1 x Jack + 3 x XLR):
- gain control,
- delay line control (from 0 to 170m),
- 5-point parametric equalizer (frequency control from 20 Hz to 20 kHz,
bandwidth control from 0,05 to 3 dB/oct., band depth control from -12 dB
to +12 dB); |
|
|
acoustic feedback suppressor turned on; |
|
|
power terminal protection devices: temperature, anti-short-circuit,
current, anti high frequency and limiter; |
|
|
can be made as a table type or built in a 19” rack cabinet |
A modern amplifier equipped
with a DSP signal processor, which enables
precise sound properties equalization in buildings with very hard
acoustic conditions.
The amplifier activates only those microphones
that are being used at the moment, which eliminates the influence of the
surrounding sound coming out of unnecessarily opened microphone channels.
Amplifier in AMWLC-9DSP/400+100 version has got extra 100W power
end, which can be ordered to DSP2 or DSP3 output channel.
|
|
TECHNICAL DATA |
AMWLC-9DSP/200 |
AMWLC-9DSP/400+100 |
AMWLC-9DSP/600 |
|
Output power (sinus) |
200W |
400W+100W |
600W |
|
Microphone and linear inputs, programmable, symmetrical and
electronic
|
inputs XLR: 1-8 |
inputs XLR: 1-8 |
inputs XLR: 1-8 |
|
- MIC/LINE switch |
yes |
yes |
yes |
|
- MIC sensitivity control |
-40dB -15dB |
-40dB -15dB |
-40dB -15dB |
|
- LINE sensitivity control |
-15dB +5dB |
-15dB +5dB |
-15dB +5dB |
|
- impedance |
1,6kΩ |
1,6kΩ |
1,6kΩ |
|
- Phantom power supply |
24V DC |
24V DC |
24V DC |
|
- HPF filter |
100 Hz, 6dB/oct. |
100 Hz, 6dB/oct. |
100 Hz, 6dB/oct. |
|
- bass – soprano control |
±12dB, 100 Hz, 10 kHz,
shalving filter |
±12dB, 100 Hz, 10 kHz,
shalving filter |
±12dB, 100 Hz, 10 kHz,
shalving filter |
|
- signalling |
green diode - activechannel
red diode - overdrive |
green diode - active channel
red diode - overdrive |
green diode - active channel
red diode - overdrive |
|
Universal input (mono) |
RCA: 9input |
RCA: 9input |
RCA: 9input |
|
- input sensitivity |
-10dB +12dB |
-10dB +12dB |
-10dB +12dB |
|
- impedance |
10kΩ |
10kΩ |
10kΩ |
|
- bass – soprano control |
±12dB, 100 Hz, 10 kHz,
shalving filter |
±12dB, 100 Hz, 10 kHz,
shalving filter |
±12dB, 100 Hz, 10 kHz,
shalving filter |
|
Limiter |
double, peak, on DSP input and on power end |
double, peak, on DSP input and on power end |
double, peak, on DSP input and on power end |
|
10-point parametric equalizer on DSP input |
±12dB |
±12dB |
±12dB |
|
5-point parametric equalizer in 4 output channels |
±12dB |
±12dB |
±12dB |
|
Acoustic feedback suppressor |
of adaption, phase shift |
of adaption, phase shift |
of adaption, phase shift |
|
Expander compressor in 8 channels |
yes |
yes |
yes |
|
Delay line in 4 output channels |
0 - 170 m |
0 - 170 m |
0 - 170 m |
|
Non-grounded symmetrical output |
100V, 70V, 50V, 8Ω, 4Ω |
100V, 70V, 50V, 8Ω, 4Ω |
100V, 70V, 50V, 8Ω, 4Ω |
|
Adjustable zonal output |
6-degree equlizer from 0-100V |
6-degree equlizer from 0-100V |
6-degree equlizer from 0-100V |
|
Frequency band |
40 - 22 000 Hz |
40 - 22 000 Hz |
40 - 22 000 Hz |
|
Non-linear distortions |
<0,1% |
<0,1% |
<0,1% |
|
Work temperature |
od -5°C do +40°C |
od -5°C do +40°C |
od -5°C do +40°C |
|
Measurements: width/height/depth [mm] |
443 x 135 x 340 |
443 x 135 x 340 |
443 x 135 x 340 |
|
Weight [kg] |
13,5 |
14 |
13,5 |
|
|
|
|
|
|
Controlling level indicator
and power terminal
work
temperature measurement |
|
|
|
|
|
10-point parametric
equalizer
on DSP input
-12dB/+12dB; 20Hz- 21kHz;
0,05oct - 3,00 oct |
|
|
|
|
|
Signal level digital control
on each output
(3 x DSP-LINE OUT + 1 x MWL-9DSP
internal power terminal) |
|
|
|
|
|
5-point parametric equalizer
in 4 input channels
12dB/+12dB; 20Hz- 21kHz;
0,05oct - 3,00 oct |
|
|
|
|
|
Delay line in 4 output
channels from 0 - 170m;
units: [MS], [m] (3 x DSP-LINE OUT
+ 1 x MWL-9DSP internal
power terminal) |
|
|
|
|
|
Acoustic feedback digital
suppressor chosen
in one of the output
channels (DSP-LINE OUT
or MWL-9DSP internal power
terminal) |
|
|
|
|
|
Form of projection (horizontal
or vertical)
Selection of form of
projection (contour or
filling)
Language option (English,
Polish)
Service mode (available for
authorized service only) |
|
|
|
|
|
|
|
|
|
